Resistance: | Fixed Resistor |
---|---|
Function for Resistance: | Protective Resistor, Load Resistor, Shunt Resistor, Sampling Resistor |
Installation: | DIP Resistor |
Material: | Ceramic and Metal |
Packaging: | Carton |
Quantity: | Duplex |
Samples: |
---|
Customization: |
---|
Suppliers with verified business licenses
Resistive body | Lead wire | ||
Inner electrode | Coating | ||
Cap | Marking |
Type |
Dimensions(mm) | ||||
L±1 | D±1.0 | d±0.05 | l±2 | a | |
RMC-CC2 | 19 | 7.0 | 0.8 | 36.0 | 2.0 |
Type |
Power Rating |
Resistance Range |
TCR (×10-6/K) |
Max. Working Voltage |
Max. Overload Voltage |
Max. Pulse Vol. |
Dielectric Withstang Voltage |
K:±10% |
|||||||
RMC-CC2 | 2W | 6.8Ω |
-900±300 |
3.6V | 9.0V | 20KV | 600V |
Test Items |
Performance Requirements △R:±(%R+0.05)Ω |
Test Methods |
|
Limit | Typical |
||
Resistance |
. Within specified tolerance |
- | 25ºC,:3.0V. At 25ºC,measuring voltage is 3V. |
TCR |
<100Ω:-900PPM/K±300 PPM/K; ≥100Ω:-1200PPM/K±300 PPM/K |
- | +25ºC/-40ºC ,+25ºC/+125ºC |
Single Pulse Power Limit |
6200W | ||
Single Pulse Time |
11.7ms | ||
Single Pulse Energy Rating |
80J | ||
Short time overload |
2 | 0.5 | 2.5(),5s. Rated voltage × 2.5 or Max.overload voltage, whichever is lower,for 5s. |
Pulse Tolerance. 100 Pulse | 1640V @ 52µF 150J/35sec. | ||
Pulse | 5 | - | ,10. The resistor mounted on to the test circuit as below is applied with high voltage impulse 10cycles. |
Life time at high voltage pulse |
5 | - | ,10000. The resistor mounted on to the test circuit as below is applied with high voltage impulse 10000cycles. |
Resistance to soldering heat |
2 | 1.0 | 350ºC±10ºC,3.5s±0.5 |
Rapid change of temperature |
2 | 1.0 | -40ºC(15min.)/+85ºC(15min),5. -40ºC(15min.)/+85ºC(15min),5cycles. |
Moisture resistance |
5 | 2.0 | 40±2ºC,90%~95%RH,1000h,1.5h /0.5h . 40±2ºC,90%~95%RH,1000h,1.5h ON/0.5h OFF cycles. |
Load life |
5 | 2.0 | 70±2ºC,1000h,1.5h /0.5h ,. 70±2ºC,1000h,1.5h ON/0.5h OFF cycles. |
Resistance to solvent |
,. No abnormal in appearance,marking shall be legible. |
- | 3min. 10min.10. Dipping in IPA or Xylene for 3min.and leaving for 10min.after removing drops,then brushing 10times. |
Suppliers with verified business licenses